Safe Air - Machining and grinding

Machining and grinding

Components

Description	Vendor	Part No./Model No.
747 Trailing Edge Flap Tracks #1,8,2 & 7	Boeing	65B17062-1165B17061-13

Milling machines

Make	Model	Travel In Inches			SpindleTaper	RPM	Motor HP
Make	Model	X	Y	Z	SpindleTaper	RPM	Motor HP
Caprice	949/R	36.00	12.00	16.00	ISO 30	70-4200	3
Caprice	CM2V	36.00	12.00	16.00	ISO 30	70-4200	3
Caprice	MT1250VR	36.00	12.50	16.00	ISO 30	60-4200	3
Arboga	U2508Drill Mill	18.90	7.08	17.13	No.3Morse	100-2900	1
Schaublin	13	10.25	9.25	12.25	ISO 30	58-2000	2
Huron	NU 4	43.31	27.56	19.68	ISO 50	30-2066	8
Huron	MU 5	51.18	27.56	21.65	ISO 50	30-2066	12
OkumaHowa(Copy Mill)	Ramcon 3-TC	33.40	20.00	16.00	ISO 50	60-2200	10
Huron(CNC Bed Mill)	SX833	118.00	39.37	39.37	ISO 50	18-2500	49
Moore(Jig Borer)	1 1/2B	14.00	9.00	9.00	Moore Taper	120-2400	1.5
AB SandensSAJO	UF 52 DM	30	5.5	19	ISO 40	110-1220	4kW

Lathes

Make	Model	Swing Dia.	Centre Height	GAP		Dist. Between Centres	Spindle Dia.	RPM		Motor HP
Colchester	Chipmaster	11.25	5.625	N/A		20.00	1.375	35-3000		2
Colchester	Student	13.25	6.5	N/A		25.00	1.625	20-3100		3
Hardinge	HLV-H294	11.00	6.00	N/A		18.00	1.250	125-3000		1.5
D.S.G	Type 13x42	13.00	6.50	N/A		42.00	1.75	35-2240		5
D.S.G	Type 13x42	13.00	6.50	N/A		42.00	1.75	35-1400		5
Colchester	Mascot 1600	17.00	8.50	28.00		40.00	3.000	20-1600		12.5
Ursus	250	19.88	9.84	27.95		59.00	4.130	35-1500		10
Boehringer (Two)	Due 500	19.69	9.44	21.26		55.12	2.440	11-2240		14.5
Okuma CNC	LS-N	21.26	11.81	N/A		49.21	2.560	43-2500		15
Nakamura Turning Centre	TMC-15	11.81	6.69	N/A		9.84	1.340	108-4500		10
Sidney	27 Inch	29.75	22.00	N/A		48.00	2.187	5-306		15
Webster & Bennett	EH48(Vertical)	N/A	48.00	N/A		37.00	N/A	4.5-100		25
Harrison	M400	16.50	8’	24.00		60.00	2.55	40-2000		10
Harrison	M300	13.00	6.57	19.00		40.00	1.5	40-2500		3
Boehringer	V4	23.50	11.75	32.00		48.00		40-2500
Lathe Harrison L5		9.0	4.5		N/A	40”

Surface grinders

Make	Model	Usable Table	Max Height Spindle to Table	Maximum Wheel Size
Okamoto	PSG-205	80”x 20”	33.5”	20”x 2”
Hangchow	MM7120A	200 x 630mm	320mm	250 x 25mm

Cylindrical grinders

Make	Model	Max. Swing Dia.	Wheel Size	Between Centres	Maximum Travel	Taper
Churchill(Universal)	PBW	16”	12” x 1”	72”	72”	#3MT
Cincinnati(Universal)	SU4D5RN-7	14”	18” x 2”	36”	36”	#5MT
Tsugami(External)	T-CGD150	4.125”	4.9”x 0.5”	6”	6”
Tsugami(Internal)	T-IGD150	4.125”		N/A	6”
Jones & Shipman(Universal)	1311	10” dia	16	18”

Tool and cutter grinders

Make	Model	Capacity
Brierly Drill Grinder	ZB25	3/64 – ½”
Haro	12	26” x 5”
Chevalier	FCG-30	1 ¼” x 6”
Jones & Shipman		10” Dia 20” between centres

Disintegrator, spark eroder

Make	Model	Table Capacity	Disentegrator Dia.
Marbaix	M-80.AS	19” x 15” x 22”	1/16” – 9/16”

Hone

Make	Model	Capacity Dia.
Sunnen	MCB.180A-H	1/8” Dia to 3.25”
Sunnen	AN Series	3.25 to 6”
Sunnen	F Series	.240” to 2.750”

Power press

Make	Model	Capacity	Stroke	Bolster
Heine	203A	25 tons	2.7S	5 ½ x 2 ¾

Saws

Make	Model	Capacity
Heska	ESU10	16” height 39” throat ¼ - 5/8 blade width
Startrite	20RWS	10” height 20” throat ¼ - ½ blade width
Pehaka	HS400	15 ¾ diameter
RongFu	RF115	4.5 diameter

Drilling machines

Make	Model	Drill Dia.	Morse Taper Size	Table Size	Speed	Arm Reach or Travel
Archdale	14567-73	Max 3”	No 5	40” x 30”	60 to 1500	32”
Muller	SR23	1 ¼ “	No 3	43” x 15”	350 to 1500	19”
ERLO	TCA 50	2”	No 4	21” x 21”	45 to 685	Fixed 16”
Jones & Shipman	738	¼”	N/A	13”x 16”	1200 to 6000	Fixed 6.5”
Strands	553	1 ¼”	No 3	10”x20”		Fixed
Lux Drill	RDM 100A	¾”	No 2	12” dia	250 to 3100	Fixed 7”

Top

Related Links